# Screen recorder

> Record your screen and camera, then turn it into a 16:9, 9:16 or square video with zooms where you clicked. Free, on your Mac; Pro adds animated captions, sound effects and a cleaner voice.

Source: https://beckonapp.ai/docs/mac/recorder/

## Record

Say "record my screen", or open the Beckon window → **Plugins** → **Recorder** → **New recording**. The recorder opens: a live picture of what you're about to record, with the controls underneath.

| Under the picture | What it does |
|---|---|
| **Display** | A whole screen. Click it to pick from your connected displays. |
| **Window** | One window. Click it to pick from your open windows, listed by app. |
| **Area** | Drag a box over the part of the screen you want. |
| Camera, microphone | Click to pick which camera or microphone to use (an iPhone works as a camera too), or to turn it off. |
| Speaker | Also record your Mac's own sound. |

A coloured border shows exactly what will be recorded, with a label naming it.

The picture shows exactly what's being captured, with your camera. Pick the video's shape above it before you start: **16:9**, **9:16** or **1:1**. For 9:16, choose **Bubble** (your camera in a circle over the screen) or **Split** (your whole screen on top, your camera underneath, still a tall 9:16 video; the recorder shows that frame next to the capture). On 9:16 the monitor outlines the part of the screen that ends up in the video; it follows your pointer, just like the finished video. If you have a second display, the recorder goes there. A few seconds into recording it shrinks to a thumbnail in the corner, with the time, Pause and Stop, and grows back when you point at it. Click the pin to keep it open, and the arrows to make the recorder Regular, Large or Extra large. While you record, the notch shows a red dot and the time. Press **Record** for a 3-second countdown. While recording you can **Pause**, then **Resume**; the paused parts are cut out. Press **Stop** when you're done, or **Discard** to throw it away.

With the camera on, the controls also have **Intro done**: talk to the camera first, press it when you turn to the screen, and the video opens on you full frame. Later, **Start outro** does the same for the ending. **Face** fills the frame with you anywhere in between, for as long as you talk to the camera; press **Back to screen** when you're done.

The recorder, the border and the notch are never in the video.

## Read from a script

Click **Teleprompter** at the top of the recorder and write or paste your script. **Show prompter** and it drops out of the notch, right under the camera, three lines at a time, so reading it looks like you're talking to the viewer.

- **Follow my voice:** it moves as you speak, listening on your Mac. Words you've said dim, and the next one is underlined. Go off-script and it waits; skip ahead and it catches up.
- **Steady scroll:** it moves at a pace you set, in words a minute. This is also what it does when the microphone is off.
- It starts when you press **Record** and pauses when you pause. Point at it for back and forward a line, pause, text size and edit.

The prompter is never in the video, and your script is saved with the recording.

:::note
The first time, macOS asks for Screen Recording and Camera permission. Turn them on in System Settings → Privacy & Security. With Accessibility on too, Beckon notes when you press keys (never which keys), so the Studio can add typing sounds.
:::

## Make it in the Studio

The Studio opens on its own when you stop. It's a separate window, in the same theme as the Beckon window, with a live preview of the finished video. Four tabs at the top: **Edit** for the layout, zooms and camera, **Captions**, **Audio** and **Export**. Every change can be undone with ⌘Z.

- **Canvas:** 16:9 for YouTube and the web, 9:16 for Reels, Shorts and TikTok, 1:1 for feeds. On 9:16 the screen fills the frame and follows your pointer.
- **Camera:** drag the bubble anywhere in the preview. Make it a circle, or a box with its own width, height and corners, and give it a border of any thickness and colour (or none). **Auto-frame my face** keeps you centred in it as you move, found on your Mac; **Closeness** sets how tight. **Mirror camera** shows you like a mirror (on) or the way others see you (off), so text behind you reads the right way.
- **Zoom on clicks:** Beckon zooms in just before each click, follows the pointer while you work, and eases back out. Set how close, or turn it off.
- **Pointer:** Beckon draws the pointer itself, so you can make it bigger, smooth out its movement, show a soft pulse on clicks, or hide it.
- **Sound:** separate levels for your voice and your Mac's sound, in the **Audio** tab.
- **Intro, outro and Face:** your camera fills the frame at the start or end, then shrinks smoothly into the bubble while the screen fades in. **Face** (⇧⌘F) does the same anywhere in between: for the piece you've selected, or four seconds from the playhead. Turn off **Animate to full frame** to cut straight across instead. Add or remove them with the buttons above the timeline.
- **Timeline:** scrub along the ruler, drag the edges of the intro, outro and Face scenes (× takes one away), click a zoom to switch just that one off, and drag the white handles at either end to trim.
- **Cut out the bits you don't want:** **Split** (⌘B) at the playhead, click the piece, and **Delete**. Cut pieces stay on the timeline, striped, and ↺ puts one back.
- **Clean up speech:** in the **Audio** tab, **Remove silence** cuts every pause longer than a second, **Remove ums and uhs** cuts the fillers, and **Remove retakes** cuts the starts you said again, keeping your last try. "What would be cut" lists each retake first. They're found in your captions, so make those first. Undo or **Put all back** brings anything back.
- **Captions:** in the **Captions** tab, click **Make captions** and Beckon writes them from your voice, on your Mac, word by word. **Plain** captions light up each word as you say it; choose the font, weight, size, position, colours, a band, outline or shadow, ALL CAPS and how long a line can be. **Save .srt** gives you a captions file for YouTube. Captions are English for now.
- **Background and padding:** a colour, a gradient or your own picture, and how much space goes around the screen.

Nothing is fixed until you export, so you can change any of this later. Your recordings stay in **Plugins** → **Recorder**.

## A hook for the first seconds (Pro)

The first three seconds decide if anyone keeps watching. Once you have captions, the **Hook** card at the top of the Captions tab offers one: a short headline over the opening, and a **cold open** that plays your strongest moment first, then the video from the start.

- Beckon picks a hook from what you said, for free.
- **Write me better hooks** writes three more, each from a different angle: curiosity, a bold claim, or the payoff first. Free accounts can try it 3 times.
- Edit the headline, turn the cold open on or off, and **Play the opening** to see it.

## Captions that look edited (Pro)

Beyond Plain, there are thirty animated caption styles in five families, each shown playing a line of your own video:

| Family | What it looks like |
|---|---|
| **Editorial** | Clean type with the key word in a large italic serif that glows softly |
| **Bold** | Heavy outlined capitals that pop, slam or bounce in, with the frame punching in on key words |
| **Minimal** | Calm, readable captions for talking-head videos and Shorts |
| **Highlight** | The whole line on screen, with the word you're saying called out |
| **Neon** | Glowing type that flickers on |

- **Pick a look** from the previews, then the colour, typeface, size and position.
- **Key words:** Beckon picks the words to call out from what you said and how you said it (the ones you stressed). Click any word in the line list to add or remove it.
- **Lines:** **Open all lines** (⇧⌘L) opens every line in its own window, following the playhead. Fix a word, or give one line its own style or hide it.
- **Safe area:** on 9:16, pick **Shorts**, **TikTok** or **Reels** and the captions stay clear of the player's buttons and title.

Words appear in place, so nothing on screen jumps as a line fills in.

## Sound and voice (Pro)

In the **Audio** tab:

- **Enhance voice:** one button. Beckon takes out background noise, the keyboard and some of the room's echo, evens out your level and sets the loudness right for where the video is going. Switch between **Before** and **After** while it plays to hear the difference. Your original recording stays as it was.
- **Sound effects:** a sound for each click, key press, zoom, caption key word and cut, in one of four packs: Soft, Clicky, Mechanical or Cinematic. Each has its own switch and level, and they dip while you talk.

## Export

In the **Export** tab, choose **1080p** or **4K**, **MP4** or **MOV**, and **30** or **60 fps** (the estimated size updates as you go), then click **Export video** (or **Export…**, ⌘E). The video is saved to your Movies folder, in a **Beckon** folder, and shown in Finder.

On Free you can try every caption style, sound effect and the enhanced voice in the preview. Exporting with them needs Pro; you can also export without them.

Recording, editing and exporting happen on your Mac and never use credits. The one exception is **Write me better hooks**: it sends the transcript (never the video or audio) to Beckon's AI service to write the hooks.
